Cisco Nexus 7000 Series

V Commands
version 5
701
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
version 5
To configure version 5 for the NetFlow exporter, use the version 5 command. To remove the version 5
configuration, use the no form of this command
version 5
no version 5
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes NetFlow exporter configuration (config-flow-exporter)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines The default NetFlow exporter version is 5.
If you remove the version 5 configuration, the NetFlow exporter defaults to version 9.
This command does not require a license.
Examples This example shows how to configure the NetFlow exporter version to version 5:
switch(config)# flow exporter Netflow-Exporter-1
switch(config-flow-exporter)# version 5
switch(config-flow-exporter-version-5)#
This example shows how to remove the version 5 configuration, which causes the NetFlow exporter to
default to version 9:
switch(config-flow-exporter-version-5)# no version 5
switch(config-flow-exporter)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show flow exporter Displays information about NetFlow exporters.
version 9 Configures the NetFlow exporter to version 9.