Cisco Nexus 7000 Series

Show Commands
show running-config diagnostic
621
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show running-config diagnostic
To display the running-configuration diagnostics, use the show running-config diagnostic command.
show running-config diagnostic [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the running-configuration diagnostics:
switch(config)# show running-config diagnostic all
!Command: show running-config diagnostic all
!Time: Fri Jan 15 22:22:01 2010
version 5.0(2)
diagnostic bootup level complete
switch(config)#
Related Commands
all (Optional) Displays the running-configuration diagnostics with defaults.
Release Modification
4.0(1) This command was introduced.
Command Description
show startup-config
diagnostic
Displays the startup-configuration diagnostics.