Cisco Nexus 7000 Series

Show Commands
show system memory-status
667
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show system memory-status
To display the memory status information, use the show system memory-status command.
show system memory-status
Syntax Description This command has no arguments or keywords.
Defaults Displays information for all features.
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the memory status information:
switch# show system memory-status
MemStatus: OK
Release Modification
4.0(1) This command was introduced.