Cisco Nexus 7000 Series

Show Commands
show xml server status
686
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show xml server status
To display information about the status of the XML server, use the show xml server status command.
show xml server status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the status of the XML server:
switch(config)# show xml server status
operational status is enabled
maximum session configured is 8
switch(config)#
Release Modification
4.0(1) This command was introduced.