Cisco Nexus 7000 Series

Show Commands
show flow timeout
489
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show flow timeout
To display the Flexible NetFlow flow cache timeout values, use the show flow timeout command.
show flow timeout
Syntax Description This command has no arguments or keywords.
Defaults Information for the Flexible NetFlow accounting configuration on the interface is displayed.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow before you can use the
show
flow timeout command.
This command does not require a license.
Examples This example shows how to display the Flexible NetFlow flow cache timeout values for F2 VDC:
switch# show flow timeout
Flow timeout values
Active timeout: 1800 seconds
Inactive timeout: 15 seconds
Flush Cache timeout 15 seconds
Fast timeout: Disabled
Session aging timeout: Disabled
Aggressive aging timeout: Disabled
switch#
Related Commands
Release Modification
6.1(1) Changed the command output.
4.0(1) This command was introduced.
Command Description
flow timeout Creates a flow timeout.