Cisco Nexus 7000 Series

Show Commands
show logging nvram
541
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show logging nvram
To display the messages in the NVRAM log, use the show logging nvram command.
show logging nvram [last number-lines]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the last 20 messages in the NVRAM log:
switch# show logging nvram last 20
switch#
last number-lines (Optional) Specifies a number of lines to display. The last number-lines is
displayed. The range is from 1 to 100 lines.
Release Modification
4.0(1) This command was introduced.