Cisco Nexus 7000 Series

Show Commands
show ntp peer-status
569
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp peer-status
To do display the status of the Network Time Protocol (NTP) peers, use the show ntp peer-status
command.
show ntp peer-status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the peer status for NTP:
switch(config)# show ntp peer-status
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show ntp peers Displays information about NTP peers.