Cisco Nexus 7000 Series

S Commands
system startup-config init
417
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
system startup-config init
To initialize the startup configuration, use the system startup-config init command.
system startup-config init
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to initialize the startup configuration:
switch(config)# system startup-config init
WARNING: This command is going to re-initialize the contents of the startup-conf
iguration.
Do you want to continue? (y/n) [y]
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
system startup-config
unlock
Releases the system startup-configuration lock.