Cisco Nexus 7000 Series

Show Commands
show ntp authentication-status
564
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp authentication-status
To display the status of the Network Time Protocol (NTP) authentication, use the show ntp
authentication-status command.
show ntp authentication-status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP authentication status:
switch(config)# show ntp authentication-status
Authentication enabled.
switch(config)#
Related Commands
Release Modification
5.0(1) This command was introduced.
Command Description
ntp authenticate Enables NTP authentication.
show ntp authentica-
tion-keys
Displays the configured NTP authentication keys.