Cisco Nexus 7000 Series

N Commands
ntp distribute
297
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
ntp distribute
To enable Cisco Fabric Services (CFS) distribution for the Network Time Protocol (NTP), use the ntp
distribute command. To disable this feature, use the no form of this command.
ntp distribute
no ntp distribute
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Global configuration mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to distribute the active NTP configuration to the fabric:
switch(config)# ntp distribute
switch(config)#
This example shows how to stop distribution of the active NTP configuration to the fabric:
switch(config)# no ntp distribute
switch(config)#
Related Commands
Release Modification
4.1(1) This command was introduced.
Command Description
ntp abort Aborts the NTP configuration.
ntp commit Commits the NTP configuration.