Cisco Nexus 7000 Series

Show Commands
show snmp sessions
644
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show snmp sessions
To display the current Simple Network Management Protocol (SNMP) sessions, use the show snmp
sessions command.
show snmp sessions
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the SNMP sessions:
switch(config)# show snmp sessions
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
snmp-server user Configures SNMP users.