Show Commands
show logging onboard
549
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show logging onboard
To display the onboard failure log (OBFL), use the show logging onboard command.
show logging onboard {boot-uptime | device-version | endtime | environmental-history |
error-stats [port number] | exception-log | interrupt-stats | module module | obfl-history |
obfl-logs | stack-trace | starttime time [options] | status}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
boot-uptime Displays the OBFL boot and uptime information.
device-version Displays the OBFL device version information.
endtime Displays the OBFL logs until the end time, in the format mm/dd/yy-HH:MM:SS.
environmental-
history
Displays the OBFL environmental history.
error-stats Displays the OBFL error statistics. Optionally, you can provide a port number to
view the error statistics for the specified port.
port number (Optional) Displays OBFL error statistics for a port. The range is from 1 to 64.
exception-log Displays the OBFL exception log.
interrupt-stats Displays the OBFL interrupt statistics.
module module Displays the OBFL information for the specified module. The range is from 1 to
18.
To get more specific information from the selected module, you can optionally
provide any of the other arguments for the show logging onboard command.
obfl-history Displays the OBFL history information.
obfl-logs Displays the OBFL Technical Support log.
stack-trace Displays the OBFL stack trace.
starttime Displays the OBFL logs from the start time, in the format mm/dd/yy-HH:MM:SS.
status Displays the OBFL enable/disable status.
Release Modification
4.0(1) This command was introduced.
To Next Page
Loading...
