Cisco Nexus 7000 Series

Show Commands
show redundancy status
613
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show redundancy status
To show detailed information about redundancy, use the show redundancy status command.
show redundancy status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to displays redundancy information:
switch# show redundancy status
Redundancy mode
---------------
administrative: HA
operational: None
This supervisor (sup-6)
-----------------------
Redundancy state: Active
Supervisor state: Active
Internal state: Active with no standby
Other supervisor (sup-5)
------------------------
Redundancy state: Not present
Supervisor state: N/A
Internal state: N/A
System start time: Fri Aug 15 15:55:19 2008
System uptime: 3 days, 23 hours, 57 minutes, 22 seconds
Release Modification
4.0(1) This command was introduced.