Cisco Nexus 7000 Series

T Commands
transport http use-vrf
697
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
transport http use-vrf
To configure the virtual routing and forwarding (VRF) instance used to send e-mail and other Call home
messages over the Hypertext Transfer Protocol (HTTP), use the transport http use-vrf command.
transport http use-vrf vrf-name
Syntax Description
Defaults None
Command Modes Call home configuration
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a VRF to send Call home messages using HTTP:
switch(config)# callhome
switch(config-callhome)# transport http use-vrf Blue
switch(config-callhome)#
Related Commands
vrf-name Virtual routing and forwarding (VRF) name. The name can any alphanumeric string up
to 255 characters.
Release Modification
5.0(1) This command was introduced.
Command Description
transport email
mail-server
Configures multiple SMTP servers as the domain name server (DNS)
names, IPv4 addresses, or IPv6 addresses for Call home.