Cisco Nexus 7000 Series

Show Commands
show ntp session status
572
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp session status
To display the Network Time Protocol (NTP) session status, use the show ntp session status command.
show ntp session status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP session status:
switch# show ntp session status
Last Action Time Stamp : Thu Aug 1 16:22:00 20
Last Action : Distribution Enable
Last Action Result : Success
Last Action Failure Reason : none
switch#
Related Commands
Release Modification
4.1(1) This command was introduced.
Command Description
show ntp source Displays information about the NTP source.
show ntp peers Displays information about NTP peers.