Cisco Nexus 7000 Series

Show Commands
show system resources
675
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show system resources
To display the system resources, use the show system resources command.
show system resources
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the system resources:
switch(config)# show system resources
Load average: 1 minute: 0.00 5 minutes: 0.00 15 minutes: 0.0
Processes : 520 total, 1 running
CPU states : 0.0% user, 0.5% kernel, 99.5% idle
Memory usage: 4135616K total, 1642556K used, 2493060K free
1188K buffers, 731988K cache
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show processes cpu Displays the CPU utilization information for processes on the device.