Cisco Nexus 7000 Series

T Commands
terminal event-manager bypass
691
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
terminal event-manager bypass
To allow the CLI commands that match an Embedded Event Manager (EEM) policy to continue to run,
use the terminal event-manager bypass command. To prevent such commands from running, use the
no form of this command.
terminal event-manager bypass
terminal no event-manager bypass
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to allow the CLI commands that match an EEM policy to continue to run:
switch# terminal event-manager bypass
switch#
This example shows how to prevent the CLI commands that match an EEM policy from running:
switch# terminal no event-manager bypass
switch#
Related Commands
Release Modification
4.2(1) This command was introduced.
Command Description
event manager policy Registers an Embedded Event Manager (EEM) policy with the EEM.