Cisco Nexus 7000 Series

S Commands
save
367
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
save
To save the current configuration session to a file, use the save command.
save location
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to save a configuration session to a file in bootflash:
switch# configure session myACLs
switch(config-s)# save bootflash:sessions/myACLs
Related Commands
location Location of the file. The location can be in bootflash:, slot0:, or volatile: The
filename can be any alphanumeric string up to 63 characters.
Release Modification
4.0(1) This command was introduced.
Command Description
delete Deletes a file from a location.