Cisco Nexus 7000 Series

S Commands
system no heartbeat
411
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
system no heartbeat
To disable the heartbeat checking (default) and revert to the factory default, use the system no heartbeat
command.
system no heartbeat
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to disable the heartbeat checks (default) and revert to the factory default:
switch(config)# system no heartbeat
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
system heartbeat Enables the heartbeat checks (default) and reverts to the factory default.