Cisco Nexus 7000 Series

Show Commands
show running-config monitor
624
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show running-config monitor
To display information about the running Ethernet Switched Port Analyzer (SPAN) configuration on the
system, use the show running-config monitor command.
show running-config monitor [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the running SPAN configuration on the system:
switch(config)# show running-config monitor
!Command: show running-config monitor
!Time: Fri Jan 15 22:24:43 2010
version 5.0(2)
logging level monitor 6
switch(config)#
Related Commands
all (Optional) Displays the running SPAN configuration with defaults.
Release Modification
4.0(1) This command was introduced.
Command Description
show monitor Displays information about the SPAN configuration.
show startup-config
monitor
Displays information about the startup SPAN configuration.