Cisco Nexus 7000 Series

Show Commands
show environment power
467
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show environment power
To display information about the power capacity and power distribution of the system, use the show
environment power command.
show environment power [ampere | detail]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines By reading information from the power supply, the system displays the power consumption information.
The actual power consumed by the system might be more than what is displayed.
This command does not require a license.
ampere (Optional) Displays information about the power capacity and power distribution in
amperes.
detail (Optional) Displays detailed information about the power capacity and power
distribution.
Release Modification
4.2.(1) This command was introduced.