Cisco Nexus 7000 Series - Page 496

Show Commands
show environment power
468
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to display information about the power capacity and power distribution of the
system:
switch(config) show environment power ampere
Power Supply:
Voltage: 50 Volts
Power Actual Total
Supply Model Output Capacity Status
(Ampere) (Ampere)
------- ------------------- ----------- ----------- --------------
1 N7K-AC-6.0KW 29.40 A 120.00 A Ok
2 N7K-AC-6.0KW 0.00 A 0.00 A Ok
3 ------------ 0.00 A 0.00 A Absent
4 ------------ 0.00 A 0.00 A Absent
Actual Power
Module Model Draw Allocated Status
(Ampere) (Ampere)
------- ------------------- ----------- ----------- --------------
6 N7K-M108X2-12L 371.00 A 17.00 A Powered-Up
7 N7K-M148GS-11 254.00 A 9.00 A Powered-Up
8 N7K-M148GS-11L 247.00 A 8.00 A Powered-Up
9 supervisor N/A 4.20 A Absent
10 N7K-SUP1 N/A 4.20 A Powered-Up
Xb1 N7K-C7018-FAB-1 N/A 2.00 A Powered-Up
Xb2 xbar N/A 2.00 A Absent
Xb3 xbar N/A 2.00 A Absent
Xb4 xbar N/A 2.00 A Absent
Xb5 xbar N/A 2.00 A Absent
fan1 N7K-C7018-FAN 4.34 A 14.72 A Powered-Up
fan2 N7K-C7018-FAN 3.78 A 10.74 A Powered-Up
N/A - Per module power not available
Power Usage Summary:
--------------------
Power Supply redundancy mode (configured) Non-Redundant(combined)
Power Supply redundancy mode (operational) Non-Redundant(combined)
Total Power Capacity (based on configured mode) 120.00 A
Total Power of all Inputs (cumulative) 120.00 A
Total Power Output (actual draw) 29.40 A
Total Power Allocated (budget) 77.00 A
Total Power Available for additional modules 42.14 A
switch(config)#
Related Commands Command Description
show environment Displays information about the hardware environment status.
show hardware
capacity
Displays information about the platform hardware resources currently
utilized by the system.