Cisco Nexus 7000 Series

E Commands
exporter
172
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
exporter
To specify a NetFlow exporter to use for a NetFlow monitor, use the exporter command. To remove a
NetFlow exporter, use the no form of this command.
exporter name
no exporter name
Syntax Description
Defaults None
Command Modes NetFlow monitor configuration (config-flow-monitor)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a NetFlow exporter for a NetFlow monitor:
switch(config)# flow monitor Custom-Flow-Monitor-1
switch(config-flow-monitor)# exporter Custom-Flow-Exporter-1
switch(config-flow-monitor)#
This example shows how to remove a NetFlow exporter:
switch(config-flow-monitor)# no exporter
Related Commands
name Name of the exporter.
Release Modification
4.0(1) This command was introduced.
Command Description
show flow sw-monitor Displays information about NetFlow monitors.