Cisco Nexus 7000 Series

Show Commands
show diagnostic ondemand setting
458
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show diagnostic ondemand setting
To display information about the on-demand diagnostic test for a module, use the show diagnostic
ondemand setting command.
show diagnostic ondemand setting
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display diagnostic on-demand information:
switch# show diagnostic ondemand setting
Test iterations = 1
Action on test failure = continue until test failure limit reaches 1
Related Commands
setting Configures the diagnostic on-demand setting.
Release Modification
4.0(1) This command was introduced.
Command Description
diagnostic ondemand
setting
Configures the diagnostic on-demand setting.