Cisco Nexus 7000 Series

Show Commands
show ntp source
575
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp source
To display information about the Network Time Protocol (NTP) source, use the show ntp source
command.
show ntp source
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP source information:
switch(config)# show ntp source
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
ntp source Configures the NTP source.