Cisco Nexus 7000 Series

S Commands
system watchdog kgdb
424
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
system watchdog kgdb
To configure the system to enter the Linux KGDB debugger on a watchdog failure, use the system
watchdog kgdb command.
system watchdog kgdb
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the system to enter the Linux KGDB debugger on a watchdog
failure:
switch(config)# system watchdog kgdb
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
system watchdog Enables the watchdog feature.
system no watchdog Disables the watchdog feature.