Cisco Nexus 7000 Series

Show Commands
show startup-config eem
657
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show startup-config eem
To display the Embedded Event Manager (EEM) startup configuration, use the show startup-config eem
command.
show startup-config eem
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the Embedded Event Manager (EEM) startup configuration:
switch# show startup-config eem
!Command: show startup-config eem
!Time: Tue Feb 2 22:41:25 2010
!Startup config saved at: Thu Jan 21 08:39:42 2010
version 5.0(2)
switch#
Release Modification
4.0(1) This command was introduced.