Cisco Nexus 7000 Series

Show Commands
show snmp community
636
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show snmp community
To display the Simple Network Management Protocol (SNMP) community strings, use the show snmp
community command.
show snmp community
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines Use the show snmp community command to display a list of SNMP communities configured on a
device.
In Cisco NX-OS Release 4.0(2) and later releases, the show snmp-community command displays any
SNMP contexts that are mapped to SNMPv2c communities.
This command does not require a license.
Examples This example shows how to display the SNMP community strings and any associated SNMP contexts:
switch# show snmp community
Community Group / Access context
--------- -------------- -------
testCommunity vdc-operator contextB
Comm2 network-admin
com3 vdc-admin
Release Modification
4.0(1) This command was introduced.