Cisco Nexus 7000 Series

Show Commands
show processes cpu
589
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show processes cpu
To display the CPU utilization information for processes on the device, use the show processes cpu
command.
show processes cpu
Syntax Description This command has no arguments or keywords.
Defaults Displays information for all processes in the local device.
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the CPU utilization information for the processes:
switch# show processes cpu
PID Runtime(ms) Invoked uSecs 1Sec Process
----- ----------- -------- ----- ----- -----------
1 286 315748 0 0 init
2 302 636268 0 0 migration/0
3 1586 72636726 0 0 ksoftirqd/0
4 502 1345165 0 0 desched/0
5 1956 559740 3 0 migration/1
6 2218 457761883 0 0 ksoftirqd/1
7 2325 1469647 1 0 desched/1
8 1158 794795 1 0 events/0
9 1258 721210 1 0 events/1
10 62 2779 22 0 khelper
15 0 30 25 0 kthread
24 0 2 5 0 kacpid
102 201 286 704 0 kblockd/0
103 276 516 535 0 kblockd/1
116 0 5 17 0 khubd
...
Release Modification
4.0(1) This command was introduced.