Cisco Nexus 7000 Series

Show Commands
show running-config cdp
619
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show running-config cdp
To display the Cisco Discovery Protocol (CDP) running configuration, use the show running-config
cdp command.
show running-config cdp [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the CDP running configuration with defaults:
switch(config)# show running-config cdp all
!Command: show running-config cdp all
!Time: Fri Jan 15 22:19:20 2010
version 5.0(2)
logging level cdp 6
cdp advertise v2
cdp enable
cdp holdtime 180
cdp timer 60
cdp format device-id system-name
interface Ethernet6/1
cdp enable
interface Ethernet6/2
cdp enable
interface Ethernet6/3
all (Optional) Displays the running configuration with defaults.
Release Modification
4.0(1) This command was introduced.