Cisco Nexus 7000 Series

E Commands
event manager environment
153
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
event manager environment
To set an Embedded Event Manager (EEM) environment variable, use the event manager environment
command. To disable an EEM environment variable, use the no form of this command.
event manager environment varname varvalue
no event manager environment varname
Syntax Description
Defaults None
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to set an EEM environment variable:
switch# configure terminal
switch(config)# event manager environment _cron_entry 0-59/2 0-23/1 * * 0-7
switch(config)#
varname Name of the EEM environment variable.
varvalue String of characters, including embedded spaces, to be placed in the environment
variable varname.
Release Modification
4.0(1) This command was introduced.