Cisco Nexus 7000 Series

Show Commands
show snmp source-interface
645
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show snmp source-interface
To display the Simple Network Management Protocol (SNMP) source interface through which
notifications are sent, use the show snmp source-interface command.
show snmp source-interface
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the SNMP source interface through which notifications are sent:
switch(config)# show snmp source-interface
-------------------------------------------------------------------
Notification source-interface
-------------------------------------------------------------------
trap lookback1
inform Ethernet1/1
-------------------------------------------------------------------
switch(config)#
Related Commands
Release Modification
4.2(1) This command was introduced.
Command Description
snmp-server source-
interface
Configures an SNMP source interface through which notifications are sent.