Cisco Nexus 7000 Series

D Commands
description (EEM)
100
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
description (EEM)
To add a description to an Embedded Event Manager (EEM) applet, use the description command. To
remove the description, use the no form of this command.
description description
no description
Syntax Description
Defaults None
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to add a description to an EEM applet:
switch# configure terminal
switch(config)# event manager applet counter-applet
switch(config-applet)# action 1.2 counter name count1 value $variable op dec
Switch(config-applet)# description “counter policy for acme”
switch(config-applet)#
Related Commands
description Comment or a description that is added to an EEM applet.
Release Modification
4.0(1) This command was introduced.
Command Description
show event manager
policy
Displays information about the configured EEM policy.