Cisco Nexus 7000 Series

Show Commands
show running-config netflow
625
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show running-config netflow
To display the NetFlow configuration that is currently on your switch, use the show running-config
netflow command.
show running-config netflow [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
all (Optional) Displays the NetFlow configuration with defaults.
Release Modification
4.0(1) This command was introduced.