Cisco Nexus 7000 Series

Show Commands
show startup-config monitor
658
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show startup-config monitor
To display information about the startup Ethernet Switched Port Analyzer (SPAN) configuration, use the
show startup-config monitor command.
show startup-config monitor
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the startup Ethernet SPAN configuration:
switch(config)# show startup-config monitor
!Command: show startup-config monitor
!Time: Tue Feb 2 22:42:07 2010
!Startup config saved at: Thu Jan 21 08:39:42 2010
version 5.0(2)
logging level monitor 6
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show monitor Displays information about an Ethernet Switched Port Analyzer (SPAN).
show running-config
monitor
Displays the running configuration to the startup configuration.