Cisco Nexus 7000 Series

D Commands
diagnostic stop
129
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
diagnostic stop
To stop one or more diagnostic tests for a module, use the diagnostic stop command.
diagnostic stop module slot test [test-id | name | all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to stop one or more diagnostic tests on a module:
switch# diagnostic stop module 6 test all
switch#
Related Commands
slot Slot number. The slot range is from 1 to 10.
test Displays the diagnostic test.
test-id (Optional) Test ID. The range is from 1 to 14.
name (Optional) Test name. The name can be any case-sensitive, alphanumeric string
up to 32 characters.
all (Optional) Displays the diagnostic test for all tests on all modules.
Release Modification
4.0(1) This command was introduced.
Command Description
diagnostic start Starts one or more diagnostic tests.