Cisco Nexus 7000 Series

Show Commands
show hardware fabric-utilization
497
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show hardware fabric-utilization
To display the fabric utilization values reported from a 10 millisecond measurement interval that is, the
ASIC measures link utilization, use the show hardware fabric-utilization command.
show hardware fabric-utilization
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the fabric utilization:
switch(config)# show hardware fabric-utilization
------------------------------------------------
Slot Total Fabric Utilization
Bandwidth Ingress % Egress %
------------------------------------------------
1 220 Gbps 0.00 0.00
2 92 Gbps 0.00 0.00
5 23 Gbps 0.00 0.00
6 23 Gbps 0.00 0.00
7 92 Gbps 0.00 0.00
9 46 Gbps 0.00 0.00
--More--
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show hardware
fabric-utilization
Displays information about fabric utilization.