Cisco Nexus 7000 Series

Show Commands
show event manager event-types
470
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show event manager event-types
To display the Embedded Event Manager (EEM) event types, use the show event manager event-types
command.
show event manager event-types [detail | event-type-name] [module module]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the details of the EEM event types:
switch# show event manager event-types detail
switch#
detail (Optional) Displays details of all event types.
event-type-name (Optional) Name of the event type.
module module (Optional) Displays the events defined for a specific module. The range is from 1
to 10.
Release Modification
4.0(1) This command was introduced.