Cisco Nexus 7000 Series

Show Commands
show checkpoint
445
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show checkpoint
To display the contents of the checkpoint file, use the show checkpoint command.
show checkpoint [name]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-operator
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the contents of the checkpoint file:
switch# show checkpoint stable
--------------------------------------------------------
Name: stable
version 4.0(2)
power redundancy-mode combined force
license grace-period
feature vrrp
feature tacacs+
feature ospf
feature pim
feature pim6
feature msdp
feature eigrp
feature rip
feature isis
feature pbr
feature private-vlan
feature port-security
feature interface-vlan
name (Optional) Name of the checkpoint file. The name can be any alphanumeric string
up to 63 characters.
Release Modification
4.0(1) This command was introduced.