Cisco Nexus 7000 Series

Show Commands
show diagnostic simulation
461
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show diagnostic simulation
To display information about a simulated diagnostic for a module, use the show diagnostic simulation
command.
show diagnostic simulation module slot
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about simulated diagnostics:
switch# show diagnostic simulation module 6
Card(6): Supervisor module-1X
________________________________________________
-NA-
switch#
Related Commands
slot Diagnostic simulation slot number. The range is from 1 to 10.
Release Modification
4.0(1) This command was introduced.
Command Description
diagnostic test
simulation
Sets a simulated test result for a diagnostic test.