Cisco Nexus 7000 Series

Show Commands
show startup-config ntp
661
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show startup-config ntp
To display the Network Time Protocol (NTP) startup configuration, use the show startup-config ntp
command.
show startup-config ntp [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP startup configuration:
switch(config)# show startup-config ntp
!Command: show startup-config ntp
!Time: Tue Feb 2 22:45:37 2010
!Startup config saved at: Thu Jan 21 08:39:42 2010
version 5.0(2)
ntp server 192.0.2.10 use-vrf Red
ntp peer 2001:db8::4101
ntp authenticate
ntp authentication-key 42 md5 dJmhwKzd 7
ntp trusted-key 42
ntp logging
ntp access-group peer NT_GLOBAL
switch(config)#
all (Optional) Displays all NTP startup configurations.
Release Modification
4.0(1) This command was introduced.