Cisco Nexus 7000 Series

Show Commands
show cfs application
433
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show cfs application
To display information about applications that are currently enabled to use Cisco Fabric Services (CFS)
distribution, use the show cfs application command.
show cfs application [name application_name]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display CFS information about applications that are currently enabled to use
CFS distribution:
switch# show cfs application
----------------------------------------------
Application Enabled Scope
----------------------------------------------
ntp No Physical-fc-ip
stp Yes Physical-eth
vpc Yes Physical-eth
igmp Yes Physical-eth
l2fm Yes Physical-eth
role No Physical-fc-ip
radius No Physical-fc-ip
callhome Yes Physical-fc-ip
Total number of entries = 8
This example shows how to display CFS information about the Call Home application:
name
application_name
(Optional) Displays the name of a specific application.
Release Modification
4.1(2) This command was introduced.