Cisco Nexus 7000 Series

Show Commands
show port-monitor status
586
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show port-monitor status
To display information about the Simple Network Management Protocol (SNMP) port-monitor status,
use the show port-monitor status command.
show port-monitor status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the SNMP port-monitor status:
switch(config)# show port-monitor status
Port Monitor : Enabled
Active Policies : None
Last 10 logs :
switch(config-port-monitor)#
Related Commands
Release Modification
4.1(2) This command was introduced.
Command Description
show port-monitor
active
Displays active port-monitor policies.
show port-monitor Displays information about the port-monitor configuration.