Cisco Nexus 7000 Series

D Commands
destination-profile message-level
117
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
destination-profile message-level
To specify a severity level for alerts that are sent to the Call home destination, use the
destination-profile message-level command.
destination-profile profile_name message-level number
Syntax Description
Defaults None
Command Modes Call home configuration (config-callhome)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to specify that messages with a severity level 5 or higher are sent to a Call home
destination:
switch(config-callhome)# destination-profile acme_destination message-level 5
Related Commands
profile_name Name you have given the Call home destination profile where the message format is
to be specified.
message-level Specifies the severity level at which messages that are sent to the Callhome
destination.
number Message severity level designations that begin at the lowest urgency level 0 and
progress to level 9, the most urgent. If you specify level 5, for example, all messages
designated level 5 or higher are sent to the destination.
Release Modification
4.0(1) This command was introduced.
Command Description
show callhome
destination-profile
Displays a Call home destination profiles.
show callhome Displays the Call home configuration.