Cisco Nexus 7000 Series

Show Commands
show monitor
558
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show monitor
To display information about the Ethernet Switched Port Analyzer (SPAN), use the show monitor
command.
show monitor
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about a SPAN:
switch(config)# show monitor
Session State Reason Description
------- ----------- ---------------------- -------------------------------
1 down Session admin shut
6 down Session admin shut
8 down Session admin shut
9 down Session admin shut
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show running-config
monitor
Displays the running configuration to the startup configuration.
show startup-config
monitor
Displays information about the startup SPAN configuration.