Cisco Nexus 7000 Series - Page 585

Show Commands
show module
557
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
This example shows how to display information for a specific module:
switch# show module 7
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
7 48 1000 Mbps Optical Ethernet Modul N7K-M148GS-11 ok
Mod Sw Hw
--- -------------- ------
7 4.1(3) 0.202
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
7 00-1b-54-c2-ed-d0 to 00-1b-54-c2-ee-04 JAF1219AGFE
Mod Online Diag Status
--- ------------------
7 Pass
Chassis Ejector Support: Enabled
Ejector Status:
Left ejector CLOSE, Right ejector CLOSE, Module HW does not support ejector based shutdo
wn.
switch#
This example shows how to display information for the fabric modules:
switch# show module xbar
Xbar Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
1 0 Fabric Module 1 N7K-C7018-FAB-1 ok
Xbar Sw Hw
--- -------------- ------
1 NA 0.101
Xbar MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 NA JAF1225AGHJ
* this terminal session
switch#
Related Commands Command Description
show hardware Displays information about the hardware.
show inventory Displays hardware inventory information.
show diagnostic events Displays diagnostic events by error and information event type.