Cisco Nexus 7000 Series - Page 584

Show Commands
show module
556
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to display information for all modules in the chassis:
switch# show module
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
7 48 1000 Mbps Optical Ethernet Modul N7K-M148GS-11 ok
9 0 Supervisor module-1X N7K-SUP1 active *
12 0 10/100/1000 Mbps Ethernet Module powered-dn
Mod Power-Status Reason
--- ------------ ---------------------------
12 powered-dn Configured Power down
Mod Sw Hw
--- -------------- ------
7 4.1(3) 0.202
9 4.1(3) 0.805
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
7 00-1b-54-c2-ed-d0 to 00-1b-54-c2-ee-04 JAF1219AGFE
9 00-1b-54-c0-ff-10 to 00-1b-54-c0-ff-18 JAB114000BV
Mod Online Diag Status
--- ------------------
7 Pass
9 Pass
Xbar Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
1 0 Fabric Module 1 N7K-C7018-FAB-1 ok
Xbar Sw Hw
--- -------------- ------
1 NA 0.101
Xbar MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 NA JAF1225AGHJ
* this terminal session
switch#