Cisco Nexus 7000 Series

X Commands
xml server max-session
708
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
xml server max-session
To configure the number of allowed XML server sessions, use the xml server max-session command.
To reset the number to the default, use the no form of this command.
xml server max-session max-sessions
no xml server max-session max-sessions
Syntax Description
Defaults The XML server sessions allowed is 8.
Command Modes Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the number of allowed XML server sessions:
switch(config)# xml server max-session 4
This example shows how to reset the number of allowed XML server sessions to the default:
switch(config)# no xml server max-session 4
Related Commands
max-sessions Maximum number of allowed XML server sessions. The range is from 1 to 8. The
default is 8.
Release Modification
4.0(1) This command was introduced.
Command Description
show xml server status Displays information about the status of the XML server.