Cisco Nexus 7000 Series - Page 526

Show Commands
show hardware fabric-utilization detail timestamp
498
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show hardware fabric-utilization detail timestamp
To display the time and value of peak utilization timestamp, use the show hardware fabric-utilization
detail timestamp command.
show hardware fabric-utilization detail timestamp
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the time and value of peak utilization:
switch(config)# show hardware fabric-utilization detail timestamp
swN7K148# show hardware fabric-utilization detail timestamp
------------------------------------------------------------------------
Fabric Planes:
A -- Unicast fabric interface
B -- Multicast/Multidestination fabric interface
-------------------------PEAK FABRIC UTILIZATION------------------------
I/O |-----FABRIC----| Ingress | Egress
Slot |Mod Inst Plane| Util Time | Util Time
------------------------------------------------------------------------
2 1 1 A 0% 08-11@19:18:41 0% 08-11@19:18:41
2 1 1 B 0% 08-11@19:18:41 0% 08-11@19:18:41
2 1 1 A 0% 08-11@19:18:41 0% 08-11@19:18:41
2 1 1 B 0% 08-11@19:18:41 0% 08-11@19:18:41
2 2 1 A 0% 08-11@19:18:41 0% 08-11@19:18:41
2 2 1 B 0% 08-11@19:18:41 0% 08-11@19:18:41
2 2 1 A 0% 08-11@19:18:41 0% 08-11@19:18:41
2 2 1 B 0% 08-11@19:18:41 0% 08-11@19:18:41
2 3 1 A 0% 08-11@19:18:41 0% 08-11@19:18:41
2 3 1 B 0% 08-11@19:18:41 0% 08-11@19:18:41
2 3 1 A 0% 08-11@19:18:41 0% 08-11@19:18:41
Release Modification
6.1(1) This command was introduced.