Cisco Nexus 7000 Series - Page 516

Show Commands
show flow record
488
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
switch# show flow record netflow ipv4 original-input
Flow record ipv4 original-input:
Description: Traditional IPv4 input NetFlow
No. of users: 0
Template ID: 0
Fields:
match ipv4 source address
match ipv4 destination address
match ip protocol
match ip tos
match transport source-port
match transport destination-port
match interface input
collect routing source as
collect routing destination as
collect routing next-hop address ipv4
collect transport tcp flags
collect counter bytes
collect counter packets
collect timestamp sys-uptime first
collect timestamp sys-uptime last
collect interface output
switch#
Table 6 describes the significant fields shown in the display.
Related Commands
Ta b l e 6 show flow record netflow-original Field Descriptions
Field Description
Description The description that you configured for the record or the
default description–User defined.
No. of users The number of references to this record in the configuration.
Total field space The number of bytes required to store these fields for one
flow.
Fields The fields that are included in this record. For more
information on the fields, refer to the match and collect
commands.
Command Description
cache Configures flow cache parameters for flow monitors.
clear flow monitor Clears the flow monitor.
exporter Specifies a flow exporter for flow monitors.
flow monitor Creates a flow monitor.
protocol-distribution Configures the collection of protocol distribution statistics for flow
monitors.
record Configures a flow record for the flow monitor.
show flow sw-monitor Displays flow monitor status and statistics.
size-distribution Configures the collection of size distribution statistics for flow monitors.
protocol-distribution Configures the collection of protocol distribution statistics for flow
monitors.
record Configures a flow record a for flow monitor.